Using the MAESTRO Guider NOTE: This is only a temporary work around for the April 08 run. This only works on hoseclamp Starting the Guider 1 Login to hoseclamp ...
Using the f/5 ADC Starting Up the ADC Instructions taken from docuwiki. 1. Log on to clark as chelle or spec 1. Type hobserve 1. In the upper right ...
Using the f/5 Hub Calibration Lamps Start Up If completely shutdown (taken from "Using SAO Calibration Lamps During Non Hecto Runs" in the MMT docuwiki): ...
Subtracting the Overscan using IRAF Since the MAESTRO CCD is read out with two amps, there are two overscan regions. However, the file produced by ICE/IRAF is ...
To do List for after the November 2007 run 1. Guide Camera. (a) Current scale on guide camera display makes it difficult to see the smallest slits. ...
Grating Platform Removal/Installation Last modification : December 10, 2007 1. Components that need to be in place prior to installation of the grating ...
Changing Fluid in the Guider Cooler On Nov. 26, 2007, we removed the green colored water from the guider cooler and replaced it with 60/40 water/methanol solution ...
MAESTRO Proceedure: Dismounting the spectrograph from the alignment frame Last modification: Nov. 29, 2007 Having 4 people makes the tedious part of the procedure ...
Cover/Baffle Information Last modification: Aug. 31, 2007 Requirements: Protect optics and mechanisms Minimize scattered and stray light Keep dust and ...
Guide Camera Removal Last modification: Sept. 10, 2007 The guide camera cannot be removed or installed while the spectrograph is mounted on the telescope.The guide ...
Modification to MAESTRO Cart Last modification: Aug. 31, 2007 Requirements/constraints The safety of the people involved cannot be compromised The instrument ...
MAESTRO INSTALLATION PROCEEDURE CHECKLIST NOTE : This document is NOT a replacement for the detailed installation proceedure. Consult the installation ...
Telescope Operator Manual Last update: July 12, 2007 This page contains descriptions of proceedures that the typical observer does not have permission to ...
MAESTRO Characterization checklist. QUESTIONS TO ANSWER: 1 is the spectrograph collimated and in good internal alignment? 1 does the collimation and focus ...